SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 110 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)COMPONENT LOCATORENTERTAINMENT/COMMUNICATION CONNECTORSRADIO C3 (UUC)
2006 Isuzu Ascender S, 5.3 M, 4WD

Radio C3 (UUC)

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Radio C3 (UUC)
WARNING: This page is about a different car, the 2007 Pontiac Torrent and 2007 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radio C3 (UUC) Connector End View
GM1845264Courtesy of GENERAL MOTORS CORP.
Radio C3 (UUC) Connector Parts Information

Connector Part Information 
  • OEM: 7283-9077-40
  • Service: 89047195
  • Description: 16-Way F Kaizen 0.64 Series (L-GY)
Terminal Part Information 
  • Terminal/Tray: 7116-4618-02/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215/J-35616-64B (L-BU)
Radio C3 (UUC) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 YE 2059 Auxiliary Audio Left Signal
2 WH 2058 Auxiliary Audio Right Signal
3 L-BU 5826 Left DVD Audio Signal (+)
4 WH 5828 Right DVD Audio Signal (+)
5 OG/BK 5831 Remote Infra Red Signal (+)
6 PK/BK 5844 Video Bright Control
7 D-GN 6975 DVD Video Signal (+)
8 PU 2056 Auxiliary Video High Signal
9 BARE 5345 Drain Wire
10 BN/WH 5846 Video Power Mode Signal
11 PU 6979 DVD Audio Common
12 BARE 6980 DVD Drain Wire
13 TN/WH 5830 Remote Infra Red Signal (-)
14 BARE 6976 DVD Video Drain Wire
15 WH/BK 5335 DVD Video Signal (-)
16 BARE 5346 Video Drain Wire
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.