SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 110 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)COMPONENT LOCATORENTERTAINMENT/COMMUNICATION CONNECTORSAMPLIFIER C3 (U65)
2006 Isuzu Ascender S, 5.3 M, 4WD

Amplifier C3 (U65)

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Amplifier C3 (U65)
WARNING: This page is about a different car, the 2007 Pontiac Torrent and 2007 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Amplifier C3 (U65) Connector End View
GM1653409Courtesy of GENERAL MOTORS CORP.
Amplifier C3 (U65) Connector Parts Information

Connector Part Information 
  • OEM: 15136073
  • Service: 15136073
  • Description: 16-Way F 0.64 Unsealed (BK)
Terminal Part Information 
  • Terminal/Tray: 7116-4618-02/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215/J-35616-64B (L-BU)
Amplifier C3 (U65) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 BN 1999 Left Rear Low Level Audio Signal (-)
2 TN 1946 Right Rear Low Level Audio Signal (-)
3 BN/WH 599 Left Rear Low Level Audio Signal (+)
4 D-BU 546 Right Rear Low Level Audio Signal (+)
5-7 - - Not Used
8 WH 1487 Antenna Enable Signal
9 L-GN/WH 512 Right Front Low Level Audio Signal (+)
10 D-GN 1947 Left Front Low Level Audio Signal (-)
11 L-GN 1948 Right Front Low Level Audio Signal (-)
12 TN 511 Left Front Low Level Audio Signal (+)
13-15 - - Not Used
16 OG 5748 Not Available
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.