Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROL SYSTEM - 5.3L - INTRODUCTION (2 OF 2)COMPONENT LOCATORENGINE CONTROLS CONNECTORS
2006 Isuzu Ascender S, 5.3 M, 4WD
Engine Controls Connectors
2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Engine Controls Connectors
Accelerator Pedal Position (APP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PU | 1272 | Low Reference |
| B | L-BU | 1162 | APP Sensor 2 Signal |
| C | TN | 1274 | 5-Volt Reference |
| D | BN | 1271 | Low Reference |
| E | D-BU | 1161 | APP Sensor 1 Signal |
| F | WH/BK | 1164 | 5-Volt Reference |
Brake Booster Vacuum Sensor (DOD)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | D-BU | 1809 | Brake Booster Vacuum Sensor Signal |
| 2 | BK | 452 | Low Reference |
| 3 | GY | 416 | 5-Volt Reference |
Camshaft Position (CMP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | RD | - | 12-Volt Reference |
| B | PK/BK | - | Low Reference |
| C | BN/WH | - | CMP Sensor Signal |
Crankshaft Position (CKP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | D-BU/WH | 1869 | CKP Sensor Signal |
| B | YE/BK | 1868 | Low Reference |
| C | L-GN | 1867 | 12-Volt Reference |
Engine Coolant Temperature (ECT) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 2761 | Low Reference |
| B | YE | 410 | ECT Sensor Signal |
Evaporative Emission (EVAP) Canister Purge Solenoid
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 239 | Ignition 1 Voltage |
| B | D-GN/WH | 428 | EVAP Canister Purge Solenoid Control |
Evaporative Emission (EVAP) Canister Vent Solenoid
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | OG | 540 | Battery Positive Voltage |
| B | WH | 1310 | EVAP Canister Vent Solenoid Control |
Fuel Injector 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1239 | Ignition 1 Voltage |
| B | BK | 1744 | Fuel Injector 1 Control |
Fuel Injector 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1339 | Ignition 1 Voltage |
| B | L-GN/BK | 1745 | Fuel Injector 2 Control |
Fuel Injector 3
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1239 | Ignition 1 Voltage |
| B | PK/BK | 1746 | Fuel Injector 3 Control |
Fuel Injector 4
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1339 | Ignition 1 Voltage |
| B | L-BU/BK | 844 | Fuel Injector 4 Control |
Fuel Injector 5
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1239 | Ignition 1 Voltage |
| B | BK/WH | 845 | Fuel Injector 5 Control |
Fuel Injector 6
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1339 | Ignition 1 Voltage |
| B | YE/BK | 846 | Fuel Injector 6 Control |
Fuel Injector 7
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1239 | Ignition 1 Voltage |
| B | RD/BK | 877 | Fuel Injector 7 Control |
Fuel Injector 8
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1339 | Ignition 1 Voltage |
| B | D-BU/WH | 878 | Fuel Injector 8 Control |
Fuel Pump and Sender Assembly
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | BK | 2450 | Ground |
| 2 | PU | 1589 | Fuel Level Sensor Signal |
| 3 | BK | 2759 | Low Reference |
| 4 | GY | 120 | Fuel Pump Supply Voltage |
Fuel Tank Pressure (FTP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 2759 | Low Reference |
| B | D-GN | 890 | Fuel Tank Pressure Sensor Signal |
| C | GY | 2709 | 5-Volt Reference |
Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN | 1664 | HO2S Low Signal - Bank 1 Sensor 1 |
| B | PU/WH | 1665 | HO2S High Signal - Bank 1 Sensor 1 |
| C | BK/WH | 3113 | HO2S Heater Low Control - Bank 1 Sensor 1 |
| D | PK | 1539 | Ignition 1 Voltage |
Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN/WH | 1669 | HO2S Low Signal - Bank 1 Sensor 2 |
| B | PU/WH | 1668 | HO2S High Signal - Bank 1 Sensor 2 |
| C | BN | 2391 | HO2S Heater Low Control - Bank 1 Sensor 2 |
| D | PK | 539 | Ignition 1 Voltage |
Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN | 1667 | HO2S Low Signal - Bank 2 Sensor 1 |
| B | PU | 1666 | HO2S High Signal - Bank 2 Sensor 1 |
| C | L-GN | 3212 | HO2S Heater Low Control - Bank 2 Sensor 1 |
| D | PK | 1539 | Ignition 1 Voltage |
Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN | 1671 | HO2S Low Signal - Bank 2 Sensor 2 |
| B | PU | 1670 | HO2S High Signal - Bank 2 Sensor 2 |
| C | RD/WH | 3223 | HO2S Heater Low Control - Bank 2 Sensor 2 |
| D | PK | 539 | Ignition 1 Voltage |
Ignition Coil 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 151 | Ground |
| B | BN | 2129 | Low Reference |
| C | PU | 2121 | IC 1 Control |
| D | PK | 39 | Ignition 1 Voltage |
Ignition Coil 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 151 | Ground |
| B | BN | 2129 | Low Reference |
| C | RD | 2127 | IC 2 Control |
| D | PK | 39 | Ignition 1 Voltage |
Ignition Coil 3
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 151 | Ground |
| B | BN | 2129 | Low Reference |
| C | L-BU | 2123 | IC 3 Control |
| D | PK | 39 | Ignition 1 Voltage |
Ignition Coil 4
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 151 | Ground |
| B | BN | 2129 | Low Reference |
| C | D-GN | 2125 | IC 4 Control |
| D | PK | 39 | Ignition 1 Voltage |
Ignition Coil 5
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 151 | Ground |
| B | BN | 2129 | Low Reference |
| C | D-GN | 2125 | IC 5 Control |
| D | PK | 39 | Ignition 1 Voltage |
Ignition Coil 6
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 151 | Ground |
| B | BN | 2129 | Low Reference |
| C | L-BU | 2123 | IC 6 Control |
| D | PK | 39 | Ignition 1 Voltage |
Ignition Coil 7
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 151 | Ground |
| B | BN | 2129 | Low Reference |
| C | RD | 2127 | IC 7 Control |
| D | PK | 39 | Ignition 1 Voltage |
Ignition Coil 8
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 151 | Ground |
| B | BN | 2129 | Low Reference |
| C | PU | 2121 | IC 8 Control |
| D | PK | 39 | Ignition 1 Voltage |
Knock Sensor (KS) 1 - Left
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | D-BU | 496 | Knock Sensor 1 Signal |
| B | GY | 1716 | Low Reference |
Knock Sensor (KS) 2 - Right
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | L-BU | 1876 | Knock Sensor 2 Signal |
| B | GY | 2303 | Low Reference |
Manifold Absolute Pressure (MAP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | OG/BK | 469 | Low Reference |
| B | L-GN | 432 | MAP Sensor Signal |
| C | GY | 2704 | 5-Volt Reference |
Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 2760 | Low Reference |
| B | TN | 472 | IAT Sensor Signal |
| C | BK | 450 | Ground |
| D | PK | 239 | Ignition 1 Voltage |
| E | YE | 492 | MAF Sensor Signal |
Throttle Body
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BN | 582 | TAC Motor Control - 2 |
| B | YE | 581 | TAC Motor Control - 1 |
| C | BK/WH | 1704 | Low Reference |
| D | D-GN | 485 | TP Sensor 1 Signal |
| E | L-BU/BK | 1688 | 5-Volt Reference |
| F | PU | 486 | TP Sensor 2 Signal |
Valve Lifter Oil Manifold (VLOM) Assembly (DOD)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | OG | 5494 | Cylinder Shutoff Solenoid Control 4 |
| B | GY | 5493 | Cylinder Shutoff Solenoid Control 3 |
| C | D-BU | 5491 | Cylinder Shutoff Solenoid Control 1 |
| D | L-GN | 5492 | Cylinder Shutoff Solenoid Control 2 |
| E | PK | 239 | Ignition 1 Voltage |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.