Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISBRAKESANTILOCK BRAKE SYSTEM WITH TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEMDIAGNOSTIC INFORMATION & PROCEDURESDIAGNOSTIC CODE INDEX
2006 Isuzu Ascender S, 5.3 M, 4WD
Diagnostic Code Index
2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Diagnostic Code Index
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| DTC C0035 or C0040 | Front Wheel Speed Sensor Circuit |
| DTC C0045 or C0050 | Rear Wheel Speed Sensor Circuit |
| DTC C0110 | Pump Motor Circuit |
| DTC C0131 | Anti-Lock Brake System (ABS)/Traction Control System (TCS) Pressure Circuit |
| DTC C0161 | Anti-Lock Brake System (ABS)/Traction Control System (TCS) Brake Switch Circuit |
| DTC C0186 | Lateral Accelerometer Circuit |
| DTC C0196 | Yaw Rate Circuit |
| DTC C0201 | Anti-Lock Brake System (ABS) Enable Relay Contact Circuit |
| DTC C0240 | EBCM Malfunction |
| DTC C0244 or P1689 | Pulse Width Modulated (PWM) Delivered Torque/Traction Control Delivered Torque Output Circuit |
| DTC C0245 | Wheel Speed Sensor Frequency Error |
| DTC C0283 | Mode Switch Circuit Malfunction |
| DTC C0287 | Longitudinal Accelerometer Circuit |
| DTC C0290 or C0292 | Devise Voltage Reference Output/Input Circuit |
| DTC C0455 | Front Steering Position Sensor Circuit |
| DTC C0550 | Electronic Control Unit (ECU) Performance |
| DTC C0558 | Calibration Data Not Programmed |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.