Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEMREPAIR INSTRUCTIONSHEAD RESTRAINT GUIDE REPLACEMENT - FRONT SEATINSTALLATION PROCEDURE

2006 Isuzu Ascender S, 5.3 M, 4WD

Installation Procedure

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Installation Procedure

Fig 1: Seat Back Frame Retainer

Courtesy of GENERAL MOTORS CORP.

Install the guides to the seat back frame, verifying that the lower retainers are fully seated to the frame.

Fig 2: View Of Head Restraint Guide Locking Tab

Courtesy of GENERAL MOTORS CORP.

Install the guide with the locking tab (1) on the seat's right-hand side.
Install the seat back cover and pad. Refer to Seat Back Cover and Pad Replacement - Front .
Install the front seat head restraint. Refer to Head Restraint Replacement - Front Seat .
Install the seat assembly. Refer to Seat Replacement - Front Bucket .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.