SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 5.3 M, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTIGNITION SWITCH/STEERING LOCKSTEERING WHEEL & STEERING COLUMNSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Isuzu Ascender S, 5.3 M, 4WD

Fastener Tightening Specifications

2006 Isuzu Ascender S, 5.3 M, 4WDSECTION Fastener Tightening Specifications
Fastener Tightening Specifications

Application Specification
Metric English
Horn Plate Switch Screws 5.5 N.m 49 lb in
HVAC Floor Duct Mounting Screw 1.9 N.m 17 lb in
Ignition Lock Cylinder Case Screws 7 N.m 62 lb in
Intermediate Shaft to the Steering Column Pinch Bolt 50 N.m 37 lb ft
Intermediate Shaft to the Steering Gear Pinch Bolt 40 N.m 29 lb ft
Steering Column Electrical Connector Screw 6 N.m 53 lb in
Steering Column Mounting Nuts 27 N.m 20 lb ft
Steering Column Trim Cover Screws Lower 3.5 N.m 31 lb in
Steering Column Trim Cover Screws Upper 1 N.m 9 lb in
Steering Wheel Nut 41 N.m 30 lb ft
Steering Wheel Shroud Screws 2 N.m 18 lb in
Turn Signal Multifunction Switch Screws Side 7 N.m 62 lb in
Turn Signal Multifunction Switch Screws Top 3 N.m 27 lb in
Upper Intermediate Shaft to Lower Intermediate Shaft Pinch Bolt 50 N.m 37 lb ft
Adapter Support Plate 7 N.m 62 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.