Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 398 (HVAC SYSTEM - AUTOMATIC)SPECIFICATIONSSENSOR RESISTANCE TABLE
2006 Isuzu Ascender S, 4.2 S, 4WD
Sensor Resistance Table
2006 Isuzu Ascender S, 4.2 S, 4WDSECTION Sensor Resistance Table
WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
| Temperature | Outside Resistance | Inside Resistance | |||
|---|---|---|---|---|---|
| °C | °F | Minimum Resistance K Ohms |
Maximum Resistance K Ohms |
Minimum Resistance K Ohms |
Maximum Resistance K Ohms |
| -40 | -40 | 332.4 | 334.7 | 95.80 | 105.6 |
| -35 | -31 | 240.3 | 241.8 | 69.09 | 75.81 |
| -30 | -22 | 175.6 | 176.6 | 50.34 | 55.00 |
| -25 | -13 | 129.6 | 130.3 | 37.04 | 40.29 |
| -20 | -4 | 96.55 | 97.07 | 27.51 | 29.80 |
| -15 | 5 | 72.63 | 72.99 | 20.61 | 22.24 |
| -10 | 14 | 55.12 | 55.38 | 15.57 | 16.74 |
| -5 | 23 | 42.20 | 42.38 | 11.86 | 12.70 |
| 0 | 32 | 32.62 | 32.75 | 9.108 | 9.712 |
| 5 | 41 | 25.34 | 25.44 | 7.047 | 7.492 |
| 10 | 50 | 19.86 | 19.94 | 5.494 | 5.825 |
| 15 | 59 | 15.68 | 15.74 | 4.326 | 4.574 |
| 20 | 68 | 12.46 | 12.51 | 3.417 | 3.602 |
| 25 | 77 | 9.98 | 10.02 | 2.73 | 2.870 |
| 30 | 86 | 8.043 | 8.076 | 2.185 | 2.295 |
| 35 | 95 | 6.517 | 6.543 | 1.757 | 1.843 |
| 40 | 104 | 5.309 | 5.33 | 1.425 | 1.494 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.