SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 294 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT VIEWS & CONNECTOR END VIEWS)ELECTRICAL CENTER IDENTIFICATION VIEWSFUSE BLOCK - REAR X2
2006 Isuzu Ascender S, 4.2 S, 4WD

Fuse Block - Rear X2

2006 Isuzu Ascender S, 4.2 S, 4WDSECTION Fuse Block - Rear X2
WARNING: This page is about a different car, the 2008 Saab 9-7X. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuse Block - Rear X2 Connector End View
GM647949Courtesy of GENERAL MOTORS CORP.
Connector Part Information 
  • OEM: 15319894
  • Service: 15319894
  • Description: 68-Way F Metri-Pack 280 Series (NA)
Terminal Part Information 
  • Pins: A1, A3, A8, B3, B8
  • Terminal/Tray: 12110842/4
  • Core/Insulation Crimp: A/B
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: A5, A9, A12, B1, B5, B12, C8, C10, C12, D2, D10, D12, E2, E9, E12, F1, F2, F10, F12
  • Terminal/Tray: 12110844/4
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: B2, B4, C2-C3, D8, E4-E5, F6
  • Terminal/Tray: 12110844/4
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: C1, D1
  • Terminal/Tray: 15324340/19
  • Core/Insulation Crimp: F/G
  • Release Tool/Test Probe: 12094430/J-35616-4A (PU)
  • Pins: C5, F8
  • Terminal/Tray: 12110842/4
  • Core/Insulation Crimp: C/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: D5
  • Terminal/Tray: 12110844/4
  • Core/Insulation Crimp: C/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
Pin Wire Circuit Function
A1 2 OG 3640 Battery Positive Voltage
A2 - - Not Used
A3 2 OG 1340 Battery Positive Voltage
A4 - - Not Used
A5 0.35 OG 2740 Battery Positive Voltage
A6-A7 - - Not Used
A8 2 OG 1240 Battery Positive Voltage
A9 0.35 D-GN 1188 Power Window Switch Right Rear Down Signal
A10-A11 - - Not Used
A12 0.35 L-GN/BK 748 Right Rear Door Ajar Switch Signal
B1 - - Not Used
B2 0.5 L-BU 1320 Stop Lamp Control
B3 2 OG 1340 Battery Positive Voltage
B4 0.35 D-BU 2115 Right Turn Signal Lamps Control
0.35 D-BU 2115 Right Turn Signal Lamps Control
B5 0.35 OG 2740 Battery Positive Voltage
B6-B7 - - Not Used
B8 2 OG 1240 Battery Positive Voltage
B9-B11 - - Not Used
B12 0.35 D-BU 2307 Passenger Air Bag On Indicator Control
C1 3 OG 3540 Battery Positive Voltage
C2 0.5 L-BU 1320 Stop Lamp Control
C3 0.35 L-BU 2114 Left Turn Signal Lamps Control
0.35 L-BU 2114 Left Turn Signal Lamps Control
C4 - - Not Used
C5 1 OG 4440 Battery Positive Voltage
C8 0.35 D-GN 2308 Passenger Air Bag Off Indicator Control
C9 - - Not Used
C10 0.35 OG 4140 Battery Positive Voltage
C11 - - Not Used
C12 0.35 L-BU 2265 Power Window Lockout Left Rear Signal
D1 3 OG 3540 Battery Positive Voltage
D2 0.35 BN 2509 Left Rear Park Lamps Control
D3-D4 - - Not Used
D5 0.8 OG 3740 Battery Positive Voltage (UQA)
D8 0.35 TN 294 Door Lock Actuator Unlock Control
0.35 TN 294 Door Lock Actuator Unlock Control
D9 - - Not Used
D10 0.35 OG 4240 Battery Positive Voltage
D11 - - Not Used
D12 0.35 L-GN 2266 Power Window Lockout Right Rear Signal
E1 - - Not Used
E2 0.35 BN 2509 Left Rear Park Lamps Control
E3 - - Not Used
E4 0.35 OG 3140 Battery Positive Voltage
0.35 OG 3140 Battery Positive Voltage
E5 0.35 L-GN 24 Backup Lamp Control
0.35 L-GN 24 Backup Lamp Control
E6-E8 - - Not Used
E9 0.35 YE 1187 Power Window Switch Left Rear Down Signal
E10-E11 - - Not Used
E12 0.35 GY/BK 1186 Power Window Switch Right Rear Up Signal
F1 0.35 YE 820 CHMSL Control
F2 0.35 BN/WH 2609 Right Rear Park Lamps Control
F3-F5 - - Not Used
F6 0.35 GY 295 Door Lock Actuator Lock Control
0.35 GY 295 Door Lock Actuator Lock Control
F7 - - Not Used
F8 1 BK 1350 Ground
F9 - - Not Used
F10 0.35 L-BU/BK 747 Left Rear Door Ajar Switch Signal
F11 - - Not Used
F12 0.35 WH 1185 Power Window Switch Left Rear Up Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.