SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 4.2 S, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 294 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT VIEWS & CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSWINDOW SWITCH - LEFT REAR
2006 Isuzu Ascender S, 4.2 S, 4WD

Window Switch - Left Rear

2006 Isuzu Ascender S, 4.2 S, 4WDSECTION Window Switch - Left Rear
WARNING: This page is about a different car, the 2008 Saab 9-7X. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Window Switch - Left Rear Connector End View
GM333036Courtesy of GENERAL MOTORS CORP.
Connector Part Information 
  • OEM: 12191825
  • Service: 15306048
  • Description: 8-Way F GT 280 Series Unsealed (BN)
Terminal Part Information 
  • Pins: A, E
  • Terminal/Tray: 15304713/19
  • Core/Insulation Crimp: 4/4
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: B-D
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: F-G
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: 2/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
Pin Wire Circuit Function
A 0.35 OG 1240 Battery Positive Voltage
B 0.35 YE 1187 Power Window Switch Left Rear Down Control
C 0.35 WH 1185 Power Window Switch Left Rear Up Control
D 0.35 L-BU 2265 Power Window Lockout Left Rear Control
E 0.35 BK 1350 Ground
F 0.35 D-BU 668 Power Window Motor Left Rear Up Control
G 0.35 BN 669 Power Window Motor Left Rear Down Control
H - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.