ABS Connectors

2006 Isuzu Ascender S, 4.2 S, 4WDSECTION ABS Connectors
Electronic Brake Control Module (EBCM)

GM1671570Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 13551457
  • 46-Way F EBC-440 (BK)
Pin Wire Color Circuit No. Function
1 - - Not Used
2 RD 4042 Battery Positive Voltage
3-4 - - Not Used
5 L-BU 2066 Serial Data Signal
6 PU 420 TCC Brake Switch/Cruise Control Release Signal
7 - - Not Used
8 L-BU 715 Lateral Accelerometer Signal
9 - - Not Used
10 L-BU 1764 Steering Wheel Position Signal B
11 L-BU 1059 Steering Wheel Position Sensor Signal 1
12 L-BU 830 Left Front Wheel Speed Sensor Signal
13 YE 873 Left Front Wheel Speed Sensor Low Reference
14 TN/BK 464 Delivered Torque Signal
15 YE 5353 Yaw Ring Raster Control
16 BK 1850 Ground
117-21 - - Not Used
22 L-BU 2088 Steering Wheel Position Sensor Low Reference
23 D-GN 2087 Steering Wheel Position Sensor 5-Volt Reference
24 OG/BK 556 Steering Wheel Position Sensor Signal 2
25 GY 626 Steering Wheel Position Sensor 5-Volt Reference
26 D-GN 872 Right Front Wheel Speed Sensor Signal
27 TN 833 Right Front Wheel Speed Sensor Low Reference
28 OG/BK 463 Requested Torque Signal
29 PU 333 Brake Fluid Level Sensor Signal
30 - - Not Used
31 RD 642 Battery Positive Voltage
32 BN 441 Ignition 3 Voltage
33-36 - - Not Used
37 D-BU 716 Yaw Rate Sensor Signal
38 YE 5353 Yaw Ring Raster Control
39 L-GN 1763 Steering Wheel Position Signal A
40 - - Not Used
41 RD 885 Left Rear Wheel Speed Sensor Low Reference
42 BK 884 Left Rear Wheel Speed Sensor Signal
43 BN 882 Right Rear Wheel Speed Sensor Signal
44 WH 883 Right Rear Wheel Speed Sensor Low Reference
45 BK 1850 Ground
46 - - Not Used
Steering Wheel Speed/Position Sensor

GM280793Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12052444
  • 8-Way F Micro-Pack 100 Series Unsealed (BK)
Pin Wire Color Circuit No. Function
1 GY 626 Steering Wheel Position Sensor 5-Volt Reference
2 OG/BK 556 Steering Wheel Position Sensor Signal 2
3 L-GN 1763 Steering Wheel Position Signal A
4 L-BU 1764 Steering Wheel Position Signal B
5 - - Not Used
6 L-BU 1059 Steering Wheel Position Sensor Signal 1
7 BN 341 Ignition 3 Voltage
8 BK/WH 751 Ground
Traction Control Switch

GM646374Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15332145
  • 8-Way F GT 150 Series Unsealed (BK)
Pin Wire Color Circuit No. Function
A-C - - Not Used
D L-BU 2066 Serial Data Signal
E BK/WH 751 Ground
F-H - - Not Used
Wheel Speed Sensor - LF

GM523630Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15326801
  • 2-Way F GT 150 Series Sealed (BK)
Pin Wire Color Circuit No. Function
A L-BU 830 Left Front Wheel Speed Sensor Signal
B YE 873 Left Front Wheel Speed Sensor Low Reference
Wheel Speed Sensor - LR

GM635009Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12052641
  • 2-Way F Metri-Pack 150 Series Sealed (BK)
Pin Wire Color Circuit No. Function
A BK 884 Left Rear Wheel Speed Sensor Signal
B RD 885 Left Rear Wheel Speed Sensor Low Reference
Wheel Speed Sensor - RF

GM523630Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15326801
  • 2-Way F GT 150 Series Sealed (BK)
Pin Wire Color Circuit No. Function
A D-GN 872 Right Front Wheel Speed Sensor Signal
B TN 833 Right Front Wheel Speed Sensor Low Reference
Wheel Speed Sensor - RR

GM635009Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12052641
  • 2-Way F Metri-Pack 150 Series Sealed (BK)
Pin Wire Color Circuit No. Function
A BN 882 Right Rear Wheel Speed Sensor Signal
B WH 883 Right Rear Wheel Speed Sensor Low Reference
Yaw Rate and lateral Acceleration Sensor

GM697024Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15383156
  • 6-Way F Quadlock Micro Sealed (GY)
Pin Wire Color Circuit No. Function
1 D-GN 2087 Steering Wheel Position Sensor 5-V Reference
2 L-BU 715 Lateral Accelerometer Signal
3 D-BU 716 Yaw Rate Sensor Signal
4 YE 5353 Yaw Ring Raster Control
5 YE 5353 Yaw Ring Raster Control
6 L-BU 2088 Steering Wheel Position Sensor Low Reference
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.