Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 4.2 S, 4WDREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSSTATIONARY WINDOW SYSTEMREPAIR INSTRUCTIONSWEATHERSTRIP SIDE RETAINER REPLACEMENTREMOVAL PROCEDURE
2006 Isuzu Ascender S, 4.2 S, 4WD
Removal Procedure
2006 Isuzu Ascender S, 4.2 S, 4WDSECTION Removal Procedure
- Open the front door.
- Remove the push-pin retainers (2) from the front door sealing auxiliary weatherstrip located at the base of the pillar.
- Pull back the front door sealing weatherstrip (1) in order to expose the windshield side reveal molding screws (2).
- Remove the screws from the windshield side reveal molding.
- Remove the reveal molding from the windshield pillar.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.