Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 4.2 S, 4WDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTWIPER/WASHER SYSTEMSWIPER SYSTEM & WASHER SYSTEMCOMPONENT LOCATORWIPER/WASHER SYSTEM CONNECTORS
2006 Isuzu Ascender S, 4.2 S, 4WD
Wiper/Washer System Connectors
2006 Isuzu Ascender S, 4.2 S, 4WDSECTION Wiper/Washer System Connectors
Headlamp Washer Fluid Pump (CE4)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | BK | 250 | Ground |
| 2 | PU | 1197 | Headlamp Washer Pump Control |
Outside Moisture Sensor (CE1)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | YE | 443 | Accessory Voltage |
| 2 | BK | 1350 | Ground |
| 3 | BK | 481 | Outside Moisture Sensor Signal 1 |
Rear Window Washer Fluid Pump (CD6)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 250 | Ground |
| B | D-GN | 392 | Rear Window Washer Pump Control |
Rear Window Wiper Motor (CD6)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 1550 | Ground |
| B | - | - | Not Used |
| C | OG | 4440 | Battery Positive Voltage |
| D | - | - | Not Used |
| E | D-GN | 2269 | Rear Window Motor Speed Signal |
Rear Window Wiper/Washer Switch (CD6)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | WH | 2283 | 12-Volt Reference |
| B | BK | 2250 | Ground |
| C | BN/WH | 230 | Instrument Panel Lamps Dimming Control |
| D | - | - | Not Used |
| E | GY | 391 | Rear Window Wiper Switch Signal |
Windshield Washer Fluid Level Switch (U68)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | BK/WH | 174 | Low Washer Fluid Indicator Signal |
| 2 | BK | 250 | Ground |
Windshield Washer Fluid Pump
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | RD | 228 | Windshield Washer Pump Control |
| B | BK | 250 | Ground |
Windshield Wiper Motor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 481 | Outside Moisture Sensor Signal 1 |
| C | PK | 94 | Windshield Wiper Switch Signal 1 |
| D | D-BU | 477 | Windshield Wiper Switch High Signal |
| E | GY | 478 | Windshield Wiper Switch Supply Voltage |
| F | YE | 143 | Accessory Voltage |
| G | D-GN | 113 | Windshield Wiper Switch Signal 2 |
| J | OG | 2268 | Windshield Washer Relay Control |
| K | - | - | Not Used |
| M | BK | 850 | Ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.