SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2006ASCENDER S, 4.2 S, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSOEM CONNECTOR END VIEWS (3 OF 5)INLINE HARNESS CONNECTOR END VIEWSC111
2006 Isuzu Ascender S, 4.2 S, 4WD

Inline Harness Connector End Views: C111

2006 Isuzu Ascender S, 4.2 S, 4WDSECTION C111
C111 I/P Harness to Body Harness

GM632357Courtesy of GENERAL MOTORS CORP.
GM646396Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15326829
  • 6-Way F GT 150 Sealed (BK)
 Connector Part Information
  • 15326833
  • 6-Way M GT 150 Sealed (BK)
Pin Wire Color Circuit No. Function Pin Wire Color Circuit No. Function
A D-BU 716 Yaw Rate Sensor Signal A D-BU 716 Yaw Rate Sensor Signal
B L-BU 2088 Steering Wheel Position Sensor Low Reference B L-BU 2088 Steering Wheel Position Sensor Low Reference
C YE 5353 Yaw Ring Raster Control C YE 5353 Yaw Ring Raster Control
D L-BU 715 Lateral D L-BU 715 Lateral
E D-GN 2087 Steering Wheel Position Sensor 5-V Reference E D-GN 2087 Steering Wheel Position Sensor 5-V Reference
F YE 5353 Yaw Ring Raster Control F YE 5353 Yaw Ring Raster Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.