Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2004ASCENDER 2WD L6-4.2LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCRANKSHAFT, ENGINE
2004 Isuzu Ascender 2WD L6-4.2L
Crankshaft, Engine
2004 Isuzu Ascender 2WD L6-4.2LSECTION Crankshaft, Engine
Engine Mechanical Specifications
Crankshaft End Play 0.112 - 0.388 mm (0 0044 - 0 0153 inch)
Crankshaft Main Bearing Clearance 0 012 - 0.064 mm (0 0004 - 0 0025 inch)
Crankshaft Main Journal Diameter 69.968-69.984 mm (2.7567 - 2.7574 inch)
Crankshaft Main Journal Out-of-Round 0.005 mm (0.0002 inch)
Crankshaft Main Journal Taper 0.005 mm (0.0002 inch)
Crankshaft End Play 0.112 - 0.388 mm (0 0044 - 0 0153 inch)
Crankshaft Main Bearing Clearance 0 012 - 0.064 mm (0 0004 - 0 0025 inch)
Crankshaft Main Journal Diameter 69.968-69.984 mm (2.7567 - 2.7574 inch)
Crankshaft Main Journal Out-of-Round 0.005 mm (0.0002 inch)
Crankshaft Main Journal Taper 0.005 mm (0.0002 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.