Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU2004ASCENDER 2WD L6-4.2LREPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINECYLINDER BLOCK ASSEMBLYCONNECTING RODSPECIFICATIONS
2004 Isuzu Ascender 2WD L6-4.2L
Connecting Rod: Specifications
2004 Isuzu Ascender 2WD L6-4.2LSECTION Specifications
Fastener Tightening Specifications
Connecting Rod Cap Bolt
First Pass 25 Nm (18 ft. lbs.)
Final Pass 110 degrees
Engine Mechanical Specifications
Connecting Rod
Connecting Rod Bearing Clearance 0.021 - 0.065 mm (0 0009 - 0 0025 inch)
Connecting Rod Bore Diameter- Bearing End; 60.322-60.388 (0.0009 - 0.003 inch)
Connecting Rod Bore Out-of-Round - Bearing End; 0.005 mm (0.0002 inch )
Connecting Rod Side Clearance 0.05 - 0.35 mm (0.0019 - 0.0137 inch)
Connecting Rod Cap Bolt
First Pass 25 Nm (18 ft. lbs.)
Final Pass 110 degrees
Engine Mechanical Specifications
Connecting Rod
Connecting Rod Bearing Clearance 0.021 - 0.065 mm (0 0009 - 0 0025 inch)
Connecting Rod Bore Diameter- Bearing End; 60.322-60.388 (0.0009 - 0.003 inch)
Connecting Rod Bore Out-of-Round - Bearing End; 0.005 mm (0.0002 inch )
Connecting Rod Side Clearance 0.05 - 0.35 mm (0.0019 - 0.0137 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.