Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
1998 Isuzu Hombre S, 2.2 4, Automatic
Quick Lookups: Fluids
1998 Isuzu Hombre S, 2.2 4, AutomaticSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | w/Denso Compressor | 8.00 OZS. | 0.23 L | PAG 46 | S | ||
| Air Cond Compressor Oil | w/OE Harrison Compressor | 8.00 OZS. | 0.23 L | PAG 150 | S | ||
| Air Cond Refrigerant | 2.00 LBS. | 0.9 KG | R-134a | S | |||
| Automatic Transmission Fluid | 2.2L Eng | 5.00 QTS. | 4.73 L | Automatic Transmission Fluid DEXRON III | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill to "max" line on the reservoir. | S | ||
| Differential Gear Oil | 2.2L Eng | 4.00 PTS. | 1.89 L | SAE 80 or 80W-90 (Below 50Deg.F), 90W or 80W-90 (0Deg.F to 90Deg.F), 140 (Above 50Deg.F Consistently) | S | ||
| Engine Coolant | 2.2L Eng | 11.50 QTS. | 10.88 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | S | ||
| Engine Oil | 2.2L Eng | 4.50 QTS. | 4.25 L | API - SAE 5W-30 (Preferred) (Below 0Deg.F to Above 100Deg.F), 10W-30 (Above 0Deg.F) | S | ||
| Fuel Tank | 2.2L Eng | 18.50 GALS. | 70.03 L | S | |||
| Manual Transmission Fluid | 2.2L Eng | N/A | N/A | Manual Transmission Fluid with 5% Friction Modifier | S | ||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid DEXRON IIE | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.