Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU1998HOMBRE S, 2.2 4, AUTOMATICREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXBODY CONTROL MODULE DTCS
1998 Isuzu Hombre S, 2.2 4, Automatic
Body Control Module DTCS
1998 Isuzu Hombre S, 2.2 4, AutomaticSECTION Body Control Module DTCS
BODY CONTROL MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description |
|---|---|
| B1397 | 5-VOLT REFERENCE CIRCUIT LOW |
| B1398 | 5-VOLT REFERENCE CIRCUIT HIGH |
| B1477 | RETAINED ACCESSORY POWER (RAP) CIRCUIT LOW |
| B1478 | RETAINED ACCESSORY POWER (RAP) CIRCUIT HIGH |
| B1480 | INADVERTENT POWER CIRCUIT MALFUNCTION |
| B2527 | FRONT FOGLIGHT CIRCUIT LOW |
| B2537 | REAR FOGLIGHT CIRCUIT LOW (EXPORT VEHICLES ONLY) |
| B2575 | HEADLIGHT REQUEST/FEEDBACK MISMATCH |
| B2577 | HEADLIGHT CONTROL CIRCUIT LOW |
| B2585 | PARK LIGHT CONTROL CIRCUIT MALFUNCTION |
| B2600 | DAYTIME RUNNING LIGHT (DRL) CIRCUIT MALFUNCTION |
| B2613 | DIMMING POTENTIOMETER CIRCUIT HIGH |
| B2617 | COURTESY LIGHT CIRCUIT LOW |
| B2618 | COURTESY LIGHT CIRCUIT HIGH |
| B2647 | AMBIENT LIGHT SENSOR CIRCUIT LOW |
| B2648 | AMBIENT LIGHT SENSOR CIRCUIT HIGH |
| B2752 | HORN RELAY COIL CIRCUIT LOW |
| B2961 | IGNITION 1, KEY IN/OUT MISMATCH |
| B2973 | DOOR KEY SWITCH CIRCUIT LOW |
| B3102 | KEYLESS ENTRY (RFA) DATA LINK CIRCUIT LOW |
| B3137 | DOOR LOCK CIRCUIT LOW |
| B3138 | DOOR LOCK CIRCUIT HIGH |
| B3147 | PASSENGER DOOR UNLOCK CIRCUIT LOW |
| B3148 | PASSENGER DOOR UNLOCK CIRCUIT HIGH |
| U1255 | CLASS 2 COMMUNICATION MALFUNCTION |
| U1301 | CLASS 2 DATA LINK HIGH |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.