Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU1997TROOPER LS V6-3165CC 3.2L SOHC MFI (6VD1)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSCYLINDER HEAD ASSEMBLY
1997 Isuzu Trooper LS V6-3165cc 3.2L SOHC MFI (6VD1)
Cylinder Head Assembly
1997 Isuzu Trooper LS V6-3165cc 3.2L SOHC MFI (6VD1)SECTION Cylinder Head Assembly
1. Cylinder head [20]
Using special tools, tighten fixing bolts to the specified torque, in sequence shown.
- Extension wrench: J-39252
- Extension wrench: J-24239-01
- Or equivalents
NOTE: Do not reuse cylinder head gasket and M11 fixing bolts. Do not apply the oil to the bolt.
Tighten bolts M8 x 1.25 to 21 Nm (15 ft. lbs.).
Tighten bolts M11 x 1.5 to 64 Nm (47 ft. lbs.).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.