Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU1996OASIS SREPAIR AND DIAGNOSIS (SINGLE PAGE)TRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSMISSION OVERHAUL - AOYA, MPJA & MPOA
1996 Isuzu Oasis S
Automatic Transmission Overhaul - AOYA, MPJA & MPOA
1996 Isuzu Oasis SSECTION Automatic Transmission Overhaul - AOYA, MPJA & MPOA
- Application
- Identification
- Description
- Operation
- Lubrication & Adjustments
- On-Vehicle Service
- Trouble Shooting
- Notes
- Symptom Diagnosis
- Notes
- Delayed Shift From "N" To "D" Or "D4"
- Delayed Shift From "N" To "R"
- Engine Runs But Vehicle Does Not Move In Any Gear
- Erratic Upshift, All Shifts
- Erratic 1-2 Upshift
- Erratic 2-3 Upshift
- Erratic 3-4 Upshift
- Excessive Idle Vibration
- Flare On Start From "D", Stall RPM High In "D4", "D", "2" & "1"
- Flare On Start From "D", Stall RPM High In "D4", "D" & "1"
- Flare On Start From "D", Stall RPM High In "2"
- Flare On Start From "D", Stall RPM Is Within Specification
- Flare On Start From "D", Stall RPM Is Low
- Flare On 2-3 Upshift
- Flare On 3-4 Upshift
- Harsh Shift When Manually Shifting To "1"
- Harsh 1-2 Upshift
- Harsh 2-3 Upshift
- Harsh 3-4 Upshift
- Harsh 2-1 Downshifts
- Harsh 3-2 Downshifts
- Harsh 4-3 Downshifts
- Lock-Up Clutch Does Not Disengage
- Lock-Up Clutch Not Smooth
- Lock-Up Clutch Does Not Engage
- No Engine Braking In "1"
- No Shift
- No Shift, Stuck In 4th Gear
- No 1-3 Shift From "D"
- No 1-4 Shift From "D4"
- Noise From Transaxle In All Gears
- Slips In All Gears
- Slips In Reverse
- Slips In 1st Gear
- Slips In 2nd Gear
- Slips In 3rd Gear
- Slips In 4th Gear
- Shift Lever Operation Rough Or Binding
- Stall RPM High, All Clutch Pressures Okay
- Vehicle Moves In All Gears Except "2"
- Vehicle Moves In All Gears Except "R"
- Vehicle Moves In "R" & "2" Only
- Vehicle Moves In "N"
- Vehicle Will Not Accelerate To Speeds Above 31 MPH
- Vibration In All Gears
- Will Not Shift Into "P" Position
- Testing
- Removal & Installation
- Torque Converter
- Transaxle Disassembly
- Component Disassembly & Reassembly
- Transaxle Reassembly
- Transaxle Specifications
- Torque Specifications
- Wiring Diagrams
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.