Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSISUZU1992RODEO LS, 4WD, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTANTI-THEFT SYSTEMSDOOR LOCKS - POWERCOMPONENT TESTINGDOOR LOCK ACTUATOR
1992 Isuzu Rodeo LS, 4WD, Standard
Door Lock Actuator
1992 Isuzu Rodeo LS, 4WD, StandardSECTION Door Lock Actuator
- Disconnect door lock actuator connector. Apply battery voltage to the actuator terminal No. 3 and ground terminal No. 1. SeeFig 1 . Door should lock. Apply battery voltage to terminal No. 1 and ground terminal No. 3. Door should unlock.
- If doors lock and unlock as described, actuators are okay. If doors do not lock and unlock as described, replace appropriate actuator as necessary.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.