Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1985 Isuzu I-Mark 2D Hatchback, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Automatic Transmission Fluid | 1.5L Eng | 6.30 QTS. | 5.96 L | Automatic Transmission Fluid DEXRON II | S | ||
| Engine Coolant | 1.5L Eng | 6.80 QTS. | 6.43 L | 50/50 mixture of good quality ethylene-glycol antifreeze & water. | S | ||
| Engine Oil | 1.5L Eng | 3.40 QTS. | 3.21 L | SAE 5W-20 (Below 20Deg.F), 5W-30 (Below 60Deg.F), 10W-30/40 (Above 0Deg.F), 20W-20/40/50 (Above 20Deg.F), 30 (Above 40Deg.F). | S | ||
| Engine Oil | 1.5L Eng | w/o Filter | 3.00 QTS. | 2.83 L | SAE 5W-20 (Below 20Deg.F), 5W-30 (Below 60Deg.F), 10W-30/40 (Above 0Deg.F), 20W-20/40/50 (Above 20Deg.F), 30 (Above 40Deg.F). | S | |
| Fuel Tank | 1.5L Eng | 11.00 GALS. | 41.63 L | S | |||
| Manual Transmission Fluid | 1.5L Eng | 2.80 QTS. | 2.64 L | SAE 5W-30SF | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.