Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Infiniti Q50 Luxe, AWDFACTORY OEM SERVICE PROCEDURE
Engine Control System (DTCS) (5 Of 6)
- DTC Index
- Engine (ECM)
- P1552 Battery Current Sensor
- P1553 Battery Current Sensor
- P1554 Battery Current Sensor
- P1556 Battery Temperature Sensor
- P1557 Battery Temperature Sensor
- P1564 ASCD Steering Switch
- P1564 ICC Steering Switch
- P1568 ICC Function
- P1572 Brake Pedal Position Switch
- P1574 ASCD Vehicle Speed Sensor
- P1574 ICC Vehicle Speed Sensor
- P1575 Brake Switch
- P1805 Brake Switch
- P2096 A/F Sensor 1
- P2097 A/F Sensor 1
- P2098 A/F Sensor 1
- P2099 A/F Sensor 1
- P2100 Throttle Control Motor Relay
- P2101 Electric Throttle Control Function
- P2103 Throttle Control Motor Relay
- P2118 Throttle Control Motor
- P2119 Electric Throttle Control Actuator
- P2122 App Sensor
- P2123 App Sensor
- P2127 App Sensor
- P2128 App Sensor
- P2132 TP Sensor
- P2133 TP Sensor
- P2135 TP Sensor
- P2138 App Sensor
- P219A Air Fuel Ratio
- P219B Air Fuel Ratio
- P2237 A/F Sensor
- P2238 A/F Sensor
- P2239 A/F Sensor
- P2240 Air Fuel Ratio Sensor 1
- P2241 Air Fuel Ratio Sensor 1
- P2242 Air Fuel Ratio Sensor 1
- P2251 A/F Sensor
- P2252 A/F Sensor
- P2253 A/F Sensor
- P2254 Air Fuel Ratio Sensor 1
- P2255 Air Fuel Ratio Sensor 1
- P2256 Air Fuel Ratio Sensor 1
- P2270 O2 Sensor
- P2271 O2 Sensor
- P2272 Heated Oxygen Sensor 2
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
