2021 Infiniti Q50 Luxe, AWDFACTORY OEM SERVICE PROCEDURE

VR30DDTT engine

  1. CHECK DTC PRIORITY 

    If DTC P0240 is displayed with DTC P0241 or P0242, first perform the trouble diagnosis for DTC P0241 or P0242.

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable. Refer to DTC Description .

    NO

    GO TO 2.

  2. PERFORM DIAGNOSIS PROCEDURE 
    NOTE: This DTC is difficult to duplicate. Perform Diagnosis Procedure to check the overall function to turbocharger boost pressure sensor.

    To check malfunction symptom before repair: Refer to DTC Diagnosis Procedure .

    Confirmation after repair: INSPECTION END

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.