Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Infiniti Q50 Luxe, AWDFACTORY OEM SERVICE PROCEDURE
Engine Control System (DTCS) (3 Of 6)
- DTC Index
- Engine (ECM)
- P0235 TC Boost Sensor
- P0236 TC Boost Sensor
- P0237 TC Boost Sensor
- P0238 TC Boost Sensor
- P0239 TC Boost Sensor
- P0240 TC Boost Sensor
- P0241 TC Boost Sensor
- P0242 TC Boost Sensor
- P023B Charge Air Cooler Cooling Electric Water Pump 1
- P023C Charge Air Cooler Cooling Electric Water Pump 1
- P026B Injection Timing
- P0300 Misfire
- P0301 Misfire
- P0302 Misfire
- P0303 Misfire
- P0304 Misfire
- P0305 Misfire
- P0306 Misfire
- P0315 CKP Sensor (Pos)
- P0326 Knock Sensor
- P0327 KS
- P0328 KS
- P0331 Knock Sensor
- P0332 KS
- P0333 KS
- P0335 Crankshaft Position Sensor
- P0340 CMP Sensor
- P0345 CMP Sensor
- P0365 Exhaust Camshaft Position Sensor
- P0390 Exhaust Camshaft Position Sensor
- P0420 Three Way Catalyst Function
- P0430 Three Way Catalyst Function
- P0441 EVAP Control System
- P0443 EVAP Canister Purge Volume Control Solenoid Valve
- P0444 EVAP Canister Purge Volume Control Solenoid Valve
- P0445 EVAP Canister Purge Volume Control Solenoid Valve
- P0447 EVAP Canister Vent Control Valve
- P0448 EVAP Canister Vent Control Valve
- P0451 EVAP Control System Pressure Sensor
- P0452 EVAP Control System Pressure Sensor
- P0453 EVAP Control System Pressure Sensor
- P0454 EVAP System Pressure Sensor
- P0456 EVAP Control System
- P0460 Fuel Level Sensor
- P0461 Fuel Level Sensor
- P0462 Fuel Level Sensor
- P0463 Fuel Level Sensor
- P0500 VSS
- P0506 ISC System
- P0507 ISC System
- P050A Cold Start Control
- P050B Cold Start Control
- P050E Cold Start Control
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
