Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Application Items
CONSULT can display each diagnostic item using the diagnostic test modes as follows.
|
Mode |
Function description |
|
ECU identification |
Parts number of ABS actuator and electric unit (control unit) can be read. |
|
Self Diagnostic Result |
Self-diagnostic results and freeze frame data can be read and erased quickly. * |
|
DATA MONITOR |
Input/Output data in the ABS actuator and electric unit (control unit) can be read. |
|
ACTIVE TEST |
Diagnostic Test Mode in which CONSULT drives some actuators apart from the ABS actuator and electric unit (control unit) and also shifts some parameters in a specified range. |
|
WORK SUPPORT |
Components can be quickly and accurately adjusted. |
* : The following diagnosis information is erased by erasing.
- DTC
- Freeze frame data (FFD)
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.