SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2019Q70 3.7 LUXE, AWDREPAIR AND DIAGNOSISBODY & FRAMEDOOR LOCKSSECURITY CONTROL SYSTEM (DTC/CIRCUIT DIAGNOSIS)DTC/CIRCUIT DIAGNOSISDTC B2602: SHIFT POSITIONDTC LOGICDTC DETECTION LOGIC
2019 Infiniti Q70 3.7 Luxe, AWD

DTC Detection Logic

2019 Infiniti Q70 3.7 Luxe, AWDSECTION DTC Detection Logic
NOTE:
  • If DTC B2602 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Logic .
  • If DTC B2602 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC Logic .

DTC No.

Trouble diagnosis name

DTC detecting condition

Possible cause

B2602

SHIFT POSITION

BCM detects the following status for 10 seconds.

  • Selector lever is in the P position
  • Vehicle speed is 4 km/h (2.5 MPH) or more
  • Ignition switch is in the ON position
  • Harness or connectors

    (The CAN communication line is open or shorted.)

  • Harness or connectors

    [A/T shift selector (detention switch) circuit is open or shorted.]

  • A/T shift selector (detention switch)
  • Combination meter
  • BCM
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.