Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Component Function Check
2019 Infiniti Q70 3.7 Luxe, AWDSECTION Component Function Check
- CHECK TURN SIGNAL LAMP OPERATION
With CONSULT
- Turn ignition switch ON.
- Select "FLASHER" of "BCM" using CONSULT.
- Select "FLASHER" in "Active Test" mode.
- With operating the test items, check that the turn signal lamps is turned ON.
RH
: Turn signal lamps (RH) ON
LH
: Turn signal lamps (LH) ON
Off
: Turn signal lamps OFF
Is the inspection result normal?
YES
Turn signal lamp circuit is normal.
NO
Refer to Diagnosis Procedure .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.