Component Inspection

2019 Infiniti Q70 3.7 Luxe, AWDSECTION Component Inspection
  1. CHECK DRIVER ASSISTANCE BUZZER 
    1. Turn ignition switch OFF.
    2. Disconnect driver assistance buzzer connector.
    3. Check resistance between driver assistance buzzer terminals.

    Terminal

    Resistance

    1

    2

    Approx. 6 Ohm

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace driver assistance buzzer.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.