SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2015Q60 BASE, 2D CONVERTIBLEREPAIR AND DIAGNOSISBODY & FRAMESEATSAUTOMATIC DRIVE POSITIONER (CONVERTIBLE)SYSTEM DESCRIPTIONAUTOMATIC DRIVE POSITIONER SYSTEMINTELLIGENT KEY INTERLOCK FUNCTIONCOMPONENT PARTS LOCATION
2015 Infiniti Q60 Base, 2D Convertible

Component Parts Location

2015 Infiniti Q60 Base, 2D ConvertibleSECTION Component Parts Location
Fig 1: Automatic Drive Positioner System Component Parts Location (1 Of 3)
GNSJMJIA2415ZZ-415Courtesy of NISSAN NORTH AMERICA, INC.
1. BCM 2. Automatic drive positioner control unit 3. Driver seat control unit
4. Unified meter and A/C amp. 5. A/T assembly 6. Tilt & telescopic switch
7. Key slot 8. Tilt sensor 9. Telescopic sensor
10. Seat memory switch 11. Door mirror remote control switch    
A. Dash side lower (passenger side) B. View with instrument driver lower panel removed C. Backside of seat cushion (driver side)
D. Behind cluster lid C E. A/T assembly
(TCM is built in A/T assembly)		 F. View with instrument driver lower panel removed
G View with steering column cover lower and upper removed        
Fig 2: Automatic Drive Positioner System Component Parts Location (2 Of 3)
GNSJMJIA2416ZZ-416Courtesy of NISSAN NORTH AMERICA, INC.
12. Driver side door switch 13. A/T shift selector (detention switch) 14. Parking brake switch
15. Door mirror (driver side) 16. Telescopic motor 17. Tilt motor
18. Forward switch 19. Sliding limit switch 20. Power walk-in switch
21. Seat belt buckle switch (driver side)        
H. View with center console assembly is removed. I. View with center console assembly is removed. J. View with instrument driver lower panel is removed.
K. View with seat back pad is removed. L. View with seat cushion pad is removed.    
Fig 3: Automatic Drive Positioner System Component Parts Location (3 Of 3)
GNSJMJIA2455ZZ-455Courtesy of NISSAN NORTH AMERICA, INC.
22. Reclining motor 23. Reclining switch
(Power seat switch)		 24. Sliding, lifting switch
(Power seat switch)
25. Sliding sensor 26. Lifting motor (front) 27. Sliding motor
28. Lifting motor (rear)        
M. View with seat cushion pad and seatback pad are removed. N. Backside of seat cushion    
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.