Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2013QX56 AWD V8-5.6L (VK56VD)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTFUEL DELIVERY AND AIR INDUCTIONACCELERATOR PEDALSERVICE AND REPAIRACCELERATOR CONTROL SYSTEMINSPECTIONWITHOUT DISTANCE CONTROL ASSIST SYSTEM
2013 Infiniti QX56 AWD V8-5.6L (VK56VD)
Without Distance Control Assist System
2013 Infiniti QX56 AWD V8-5.6L (VK56VD)SECTION Without Distance Control Assist System
ACCELERATOR CONTROL SYSTEM
MODELS WITHOUT DISTANCE CONTROL ASSIST SYSTEM : Inspection
INSPECTION AFTER INSTALLATION
- Check accelerator pedal moves smoothly within the whole operation range when it is fully depressed and released.
- Check accelerator pedal securely returns to the fully released position.
- For the electrical inspection of accelerator pedal position sensor, refer to the following table:
CAUTION:
When harness connector of accelerator pedal position sensor is disconnected, perform "Accelerator
Pedal Released Position Learning". Refer to the following table:
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.