SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2013QX56 AWD V8-5.6L (VK56VD)REPAIR AND DIAGNOSISLIGHTING AND HORNSTRUNK LAMPSERVICE AND REPAIRREMOVAL AND INSTALLATION
2013 Infiniti QX56 AWD V8-5.6L (VK56VD)

Removal and Installation

2013 Infiniti QX56 AWD V8-5.6L (VK56VD)SECTION Removal and Installation



LUGGAGE ROOM LAMP

Removal and Installation


CAUTION:
- Disconnect the battery cable from negative terminal or remove the fuse.
- Never touch the glass of bulb directly by hand. Keep grease and other oily substances away from it.
Never touch bulb by hand while it is lit or right after it is off.
- Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with a new one.

REMOVAL

1.Insert any appropriate tool into the gap between lens and roof garnish, and then remove lens.
2.Disengage luggage room lamp housing fixing metal clips, and then disconnect luggage room lamp harness connector.
3.Remove luggage room lamp housing.

INSTALLATION

Install in the reverse order of removal.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.