Component Function Check

2013 Infiniti QX56 AWD V8-5.6L (VK56VD)SECTION Component Function Check



TAIL LAMP CIRCUIT

BACK DOOR SIDE : Component Function Check


1. CHECK TAIL LAMP (BODY SIDE) OPERATION

Check that the tail lamp (body side) is turned ON.
Is the inspection result normal?
YES- GO TO 2.
NO- Refer to "BODY SIDE : Component Function Check" Component Function Check.

2. CHECK TAIL LAMP (BACK DOOR SIDE) OPERATION

CONSULT ACTIVE TEST
1.Select "EXTERNAL LAMPS" of IPDM E/R active test item.
2.With operating the lighting switch, check that the tail lamp (back door side) is turned ON.
TAIL: Tail lamp (back door side) ON


Off: Tail lamp (back door side) OFF
Is the inspection result normal?
YES- Tail lamp (back door side) circuit is normal.
NO- Refer to "BACK DOOR SIDE : Diagnosis Procedure" Diagnosis Procedure.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.