Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2013QX56 AWD V8-5.6L (VK56VD)REPAIR AND DIAGNOSISLIGHTING AND HORNSHEADLAMPSERVICE AND REPAIROVERHAUL
2013 Infiniti QX56 AWD V8-5.6L (VK56VD)
Overhaul
2013 Infiniti QX56 AWD V8-5.6L (VK56VD)SECTION Overhaul
FRONT COMBINATION LAMP
Disassembly and Assembly
DISASSEMBLY
1.Rotate resin cap counterclockwise and unlock it.
2.Rotate xenon bulb socket counterclockwise and unlock it.
3.Remove retaining spring lock. Remove xenon bulb.
4.Remove bumper bracket.
5.Rotate parking lamp bulb socket counterclockwise and unlock it.
6.Remove bulb from parking lamp bulb socket.
7.Rotate front turn signal lamp bulb socket counterclockwise and unlock it.
8.Remove bulb from front turn signal lamp bulb socket.
9.Rotate side marker lamp bulb socket counterclockwise and unlock it.
10.Remove bulb from bulb socket.
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION:
- HID control unit and xenon bulb socket cannot be disassembled.
- After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.