Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2013QX56 AWD V8-5.6L (VK56VD)REPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTMEMORY POSITIONING SYSTEMSTESTING AND INSPECTIONCOMPONENT TESTS AND GENERAL DIAGNOSTICSPOWER SEAT SWITCH GROUND CIRCUIT
2013 Infiniti QX56 AWD V8-5.6L (VK56VD)
Power Seat Switch Ground Circuit
2013 Infiniti QX56 AWD V8-5.6L (VK56VD)SECTION Power Seat Switch Ground Circuit
POWER SEAT SWITCH GROUND CIRCUIT
Diagnosis Procedure
1. CHECK POWER SEAT SWITCH GROUND CIRCUIT
1.Turn ignition switch OFF.
2.Disconnect power seat switch connector.
3.Check continuity between power seat switch harness connector and ground.
Is the inspection result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- Repair or replace harness or connector.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.