Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Component Function Check
2013 Infiniti M37 x SportSECTION Component Function Check
- CHECK FRONT WIPER POSITION SIGNAL
CONSULT DATA MONITOR
- Select "WIP AUTO STOP" of IPDM E/R data monitor item.
- Operate the front wiper.
- With the front wiper operation, check the monitor status.
Monitor item Condition Monitor status WIP AUTO STOP Front wiper motor Stop position STOP P Except stop position ACT P Is the inspection result normal?
YES: Front wiper position signal circuit is normal.
NO: Refer to "DIAGNOSIS PROCEDURE ".
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.