Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2013G37 CONVERTIBLE V6-3.7L (VQ37VHR)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSENGINE CONTROL MODULETESTING AND INSPECTIONADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (ECM)SPECIAL REPAIR REQUIREMENT
2013 Infiniti G37 Convertible V6-3.7L (VQ37VHR)
Special Repair Requirement
2013 Infiniti G37 Convertible V6-3.7L (VQ37VHR)SECTION Special Repair Requirement
INSPECTION AND ADJUSTMENT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (ECM) : Special Repair Requirement
1. PERFORM INITIALIZATION OF IVIS (NATS) SYSTEM AND REGISTRATION OF ALL IVIS (NATS) IGNITION KEY IDS
Refer to "ECM RE-COMMUNICATING FUNCTION : Special Repair Requirement" Special Repair Requirement.
- GO TO 2.
2. PERFORM VIN REGISTRATION
Refer to "VIN REGISTRATION : Special Repair Requirement" Special Repair Requirement.
- GO TO 3.
3. PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
Refer to "ACCELERATOR PEDAL RELEASED POSITION LEARNING : Special Repair Requirement" Special Repair Requirement.
- GO TO 4.
4. PERFORM THROTTLE VALVE CLOSED POSITION LEARNING
Refer to "THROTTLE VALVE CLOSED POSITION LEARNING : Special Repair Requirement" Special Repair Requirement.
- GO TO 5.
5. PERFORM IDLE AIR VOLUME LEARNING
Refer to "IDLE AIR VOLUME LEARNING : Special Repair Requirement" Special Repair Requirement.
- END
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.