SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2013G37 CONVERTIBLE V6-3.7L (VQ37VHR)REPAIR AND DIAGNOSISBODY AND FRAMESEATSTESTING AND INSPECTIONCOMPONENT TESTS AND GENERAL DIAGNOSTICSPOWER SEAT SWITCH GROUND CIRCUITDRIVER SIDE
2013 Infiniti G37 Convertible V6-3.7L (VQ37VHR)

Driver Side

2013 Infiniti G37 Convertible V6-3.7L (VQ37VHR)SECTION Driver Side



POWER SEAT SWITCH GROUND CIRCUIT

DRIVER SIDE : Diagnosis Procedure


1. CHECK POWER SEAT SWITCH GROUND CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect power seat switch connector.
3.Check continuity between power seat switch connector and ground.





Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace harness.

2. CHECK POWER SEAT SWITCH INTERNAL CIRCUIT

Check lifting switch (rear).
Refer to "DRIVER SIDE : Component Inspection" Component Inspection.
Is the inspection result normal?
YES- GO TO 3.
NO- Replace power seat switch. Refer to "Removal and Installation" Power Seat Switch.

3. CHECK INTERMITTENT INCIDENT

Check intermittent incident.
Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.