SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2013G37 CONVERTIBLE V6-3.7L (VQ37VHR)REPAIR AND DIAGNOSISBODY AND FRAMEROOF AND ASSOCIATED COMPONENTSCONVERTIBLE TOPTESTING AND INSPECTIONPROGRAMMING AND RELEARNINGADDITIONAL SERVICE WHEN REPLACING CONTROL UNITWORK PROCEDURE
2013 Infiniti G37 Convertible V6-3.7L (VQ37VHR)

Work Procedure

2013 Infiniti G37 Convertible V6-3.7L (VQ37VHR)SECTION Work Procedure



ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT

Work Procedure


1. PERFORM INITIALIZATION WITHOUT CONSULT

Perform initialization without CONSULT. Refer to "Work Procedure" Work Procedure.
- GO TO 2.

2. PERFORM INITIALIZATION FOR FRONT POWER WINDOW

Perform initialization for front power window. Refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement" Special Repair Requirement.
- GO TO 3.

3. PERFORM INITIALIZATION WITH CONSULT

Perform initialization with CONSULT. Refer to "Work Procedure" Work Procedure.
- GO TO 4.

4. CHECK RETRACTABLE HARD TOP OPERATION

Check retractable hard top operation.
Is the inspection result normal ?
YES- WORK END
NO- GO TO 1.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.