Selective Unlock Function Does Not Operate

2013 Infiniti G37 Convertible V6-3.7L (VQ37VHR)SECTION Selective Unlock Function Does Not Operate



SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK "DOOR LOCK-UNLOCK SET" SETTING IN "WORK SUPPORT"

Check "DOOR LOCK-UNLOCK SET" setting in "WORK SUPPORT".
Refer to "DOOR LOCK : CONSULT Function (BCM DOOR LOCK)" CONSULT Function.
Is the inspection result normal?
YES- GO TO 2.
NO- Set "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT".

2. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- GO TO 1.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.