CONSULT Function

DIAGNOSIS SYSTEM (A/C AUTO AMP.)

CONSULT Function


APPLICATION ITEM

CONSULT performs the following functions via CAN communication with A/C auto amp.





NOTE:
Diagnosis should be performed with engine running. Door motor operation speeds become slower and NO
results may be returned even for normal operation if battery voltage drops below 12 V during self-diagnosis.

ECU IDENTIFICATION

Part number of A/C auto amp. can be checked.
NOTE:
When the vehicle specification is written to A/C auto amp. using control unit setting, part number of A/C auto amp. is updated to match the vehicle specification.

SELF DIAGNOSTIC RESULT

Diagnosis result that is judged by A/C auto amp. can be checked. Testing and Inspection.

DATA MONITOR

Input/output signal of A/C auto amp. can be checked.
Display item list





*: With Forest Air

ACTIVE TEST

The signals used to activate each device forcibly supplied from A/C auto amp. operation check of air conditioning system can be performed.





Check each output device
With Forest Air





Without Forest Air





NOTE:
Perform the inspection of each output device after start in the engine because the compressor is operated.

WORK SUPPORT

Setting change of each setting functions can be performed.





*: With Forest Air

CONFIGURATION

The vehicle specification that is written in A/C auto amp. can be displayed or stored.
The vehicle specification can be written when A/C auto amp. is replaced.
Description.