Scan Tool Testing and Procedures

DIAGNOSIS SYSTEM (ADAS CONTROL UNIT)

CONSULT Function (ICC/ADAS)


APPLICATION ITEMS

CONSULT performs the following functions via CAN communication using ADAS control unit.






WORK SUPPORT






NOTE:
- Causes of the maximum five cancellations (system cancel) are displayed.
- The displayed cancellation causes display the number of the ignition switch ON/OFF up to 254. It is fixed to
254 if it is over 254. It returns to 0 when the same cancellation cause is detected again.
Display Items for The Cause of Automatic Cancellation 1






Display Items for The Cause of Automatic Cancellation 2











SELF DIAGNOSTIC RESULT

Testing and Inspection.

DATA MONITOR






















ACTIVE TEST


CAUTION:
- Never perform "Active Test" while driving the vehicle.
- The "Active Test" cannot be performed when the following systems warning lamp is illuminated.
- ICC system warning lamp
- Lane departure warning lamp
- BSW/BSI warning lamp
- IBA OFF indicator lamp (IBA system ON)
- Shift the selector lever to "P" position, and then perform the test.





METER LAMP
NOTE:
The test can be performed only when the engine is running.





STOP LAMP





ICC BUZZER





BRAKE ACTUATOR
NOTE:
The test can be performed only when the engine is running.





NOTE:
The test is finished in 10 seconds after starting





Active Pedal

CAUTION:
- Shift the selector lever to "P" position, and then perform the test.
- Never depress the accelerator pedal excessively. (The engine speed may rise unexpectedly when finishing the test.)
NOTE:
- Depress the accelerator pedal to check when performing the test.
- The test can be performed only when the engine is running.





NOTE:
The test is finished in 10 seconds after starting





DCA INDICATOR
NOTE:
The test can be performed only when the engine is running.





LDP BUZZER





WARNING SYSTEM IND





LDP ON IND





LANE DEPARTURE W/L





BSW/BSI WARNING LAMP





BSI ON INDICATOR