Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2012M56 V8-5.6L (VK56VD)REPAIR AND DIAGNOSISBODY AND FRAMESEATSMEMORY POSITIONING SYSTEMSDESCRIPTION AND OPERATIONENTRY ASSIST FUNCTIONSYSTEM DESCRIPTION
2012 Infiniti M56 V8-5.6L (VK56VD)
System Description
2012 Infiniti M56 V8-5.6L (VK56VD)SECTION System Description
SYSTEM
ENTRY ASSIST FUNCTION : System Description
The seat is in the exiting position when following condition is satisfied, the seat returns from exiting position to the previous driving position.
NOTE:
- This function is set to ON before delivery (initial setting).
- Further information for the system setting procedure. Description.
OPERATION PROCEDURE
1.Turn ignition switch ACC.
2.Driver seat and steering column will return from the exiting position to entry position.
OPERATION CONDITION
Satisfy all of the following items. The entry assist function is not performed if these items are not satisfied.
DETAIL FLOW
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.