Component Function Check

2012 Infiniti G37 Sport, 2D CoupeSECTION Component Function Check
  1. CHECK SNOW MODE SWITCH FUNCTION
    1. Turn ignition switch ON.
    2. Select "SNOW MODE SW" in "DATA MONITOR" mode with CONSULT.
    3. Check "SNOW MODE SW" indication under the following conditions.
      Monitor item Condition Indication
      SNOW MODE SW Snow mode switch ON ON
      OFF OFF

      Is the inspection result normal? 

      YES: GO TO 2.

      NO: Go to "DIAGNOSIS PROCEDURE ".

  2. CHECK SNOW MODE INDICATOR FUNCTION
    1. Turn ignition switch ON.
    2. Check the snow mode indicator in the snow mode switch under the following condition.
      Condition Snow mode indicator
      Snow mode switch ON ON
      OFF OFF

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Go to "DIAGNOSIS PROCEDURE ".

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.