SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2012G37 SPORT, 2D COUPEREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSPOWER WINDOW CONTROL SYSTEM (COUPE)ECU DIAGNOSIS INFORMATIONBCM (BODY CONTROL MODULE)REFERENCE VALUEPHYSICAL VALUES
2012 Infiniti G37 Sport, 2D Coupe

Physical Values

2012 Infiniti G37 Sport, 2D CoupeSECTION Physical Values
Terminal No. (Wire color) Description Condition Value (Approx.)
+ - Signal name Input/Output
1 (W) Ground Battery power supply Input Ignition switch OFF Battery voltage
2 (Y) Ground P/W power supply (BAT) Output Ignition switch OFF 12 V
3 (BG) Ground P/W power supply (RAP) Output Ignition switch ON 12 V
4 (LG) Ground Interior room lamp power supply Output Interior room lamp battery saver is activated. (Cuts the interior room lamp power supply) 0 V
Interior room lamp battery saver is not activated. (Outputs the interior room lamp power supply) 12 V
5 (P) Ground Passenger door UNLOCK Output Passenger door UNLOCK (Actuator is activated) 12 V
Other than UNLOCK (Actuator is not activated) 0 V
7 (SB) Ground Step lamp Output Step lamp ON 0 V
OFF 12 V
8 (V) Ground All doors, fuel lid LOCK Output All doors, fuel lid LOCK (Actuator is activated) 12 V
Other than LOCK (Actuator is not activated 0 V
9 (G) Ground Driver door, fuel lid UNLOCK Output Driver door, fuel lid UNLOCK (Actuator is activated) 12 V
Other than UNLOCK (Actuator is not activated) 0 V
11 (R) Ground Battery power supply Input Ignition switch OFF Battery voltage
13 (B) Ground Ground - Ignition switch ON 0 V
14 (W) Ground Push-button ignition switch illumination ground Output Tail lamp OFF 0 V
ON
NOTE: When the illumination brightening/dimming level is in the neutral position.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.