SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2011M56 V8-5.6L (VK56VD)REPAIR AND DIAGNOSISINSTRUMENT PANEL, GAUGES AND WARNING INDICATORSTESTING AND INSPECTIONSYMPTOM RELATED DIAGNOSTIC PROCEDURESTHE METER CONTROL SWITCH IS INOPERATIVE
2011 Infiniti M56 V8-5.6L (VK56VD)

The Meter Control Switch Is Inoperative

2011 Infiniti M56 V8-5.6L (VK56VD)SECTION The Meter Control Switch Is Inoperative

THE METER CONTROL SWITCH IS INOPERATIVE





Description
If any of the following malfunctions is found for the meter control switch operation.
- All switches are inoperative
- The specified switch cannot be operated




Diagnosis Procedure
1.CHECK METER CONTROL SWITCH SIGNAL CIRCUIT
Check the meter control switch signal circuit. Meter Control Switch Signal Circuit.
Is the inspection result normal?
YES - GO TO 2.
NO - Repair harness or connector.
2.CHECK METER CONTROL SWITCH
Perform a unit check for the meter control switch. Meter Control Switch Signal Circuit.
Is the inspection result normal?
YES - Replace combination meter. Removal And Installation.
NG - Replace meter control switch. Removal And Installation.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.