Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2011M56 V8-5.6L (VK56VD)REPAIR AND DIAGNOSISCRUISE CONTROLDESCRIPTION AND OPERATIONCONVENTIONAL (FIXED SPEED) CRUISE CONTROL MODE FUNCTIONMENU DISPLAYED BY PRESSING EACH SWITCH
2011 Infiniti M56 V8-5.6L (VK56VD)
Menu Displayed By Pressing Each Switch
2011 Infiniti M56 V8-5.6L (VK56VD)SECTION Menu Displayed By Pressing Each Switch
OPERATION
CONVENTIONAL (FIXED SPEED) CRUISE CONTROL MODE FUNCTION : Menu Displayed by Pressing Each Switch
ICC SYSTEM DISPLAY (ON THE INFORMATION DISPLAY)
SYSTEM CONTROL CONDITION DISPLAY
Push and hold the ICC MAIN switch for longer than approximately 1.5 seconds. This mode will be in a standby state for setting.
WARNING AND AUTOMATIC CANCELLATION DISPLAY
NOTE:
When the ICC system is automatically canceled, the cancellation condition can be displayed on "WORK SUPPORT" of CONSULT-III (ICC/ADAS).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.