Wiper Does Not Wipe When Front Washer Operates

2009 Infiniti M35x AWD V6-3.5L (VQ35HR)SECTION Wiper Does Not Wipe When Front Washer Operates




FRONT WIPER AND WASHER SYSTEM


Wiper Does Not Wipe When Front Washer Operates

1.CHECK CIRCUIT BETWEEN COMBINATION SWITCH AND BCM
With CONSULT-III
1. Select "FR WASHER SW" of BCM data monitor item.
2. Check that "FR WASHER SW" turn ON-OFF according to front wiper switch operation.
Without CONSULT-III
Refer to Component Tests and General Diagnostics.
OK or NG
OK - Replace BCM. Refer to Service and Repair.
NG - Check combination switch (wiper switch). Refer to Component Tests and General Diagnostics.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.