Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2009M35X AWD V6-3.5L (VQ35HR)REPAIR AND DIAGNOSISPOWER AND GROUND DISTRIBUTIONPOWER DISTRIBUTION MODULESERVICE AND REPAIRIPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)
2009 Infiniti M35x AWD V6-3.5L (VQ35HR)
IPDM E/R (Intelligent Power Distribution Module Engine Room)
2009 Infiniti M35x AWD V6-3.5L (VQ35HR)SECTION IPDM E/R (Intelligent Power Distribution Module Engine Room)
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)
Removal and Installation of IPDM E/R
: Vehicle front
REMOVAL
1. Remove cowl top cover (RH). Refer to Locations Service and Repair.
2. Disengage pawls (A) on both side of IPDM E/R cover B (1), remove IPDM E/R cover A (2).
3. While pushing pawl (A) on backside of IPDM E/R cover B (1) toward vehicle front to unlock, lift up IPDM E/R (2).
4. Disengage pawls on both side of IPDM E/R (1), remove IPDM E/R cover B.
5. Remove harness connector from IPDM E/R (1) and remove
IPDM E/R (1).
INSTALLATION
Installation is the reverse order of removal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.