Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2008FX45 AWD V8-4.5L (VK45DE)REPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSRECALLSCAMPAIGN P0303 - SPEEDOMETER/ODOMETER REPROGRAMMINGOVERVIEW
2008 Infiniti FX45 AWD V8-4.5L (VK45DE)
Campaign P0303 - Speedometer/Odometer Reprogramming: Overview
2008 Infiniti FX45 AWD V8-4.5L (VK45DE)SECTION Overview
Reference: ITB10-045A
Date: August 31, 2010
VOLUNTARY SERVICE CAMPAIGN
2007-2008 FX SPEEDOMETER AND ODOMETER PROGRAMMING ERROR
This bulletin has been amended. The correct Owner's Letter has been attached.
CAMPAIGN ID#: P0303
APPLIED VEHICLES: 2007-2008 FX (S50)
Check Service Comm to confirm campaign eligibility
INTRODUCTION
On certain model year 2007 and 2008 Infiniti FX vehicles the speedometer and odometer are reading out of specification. To remedy this condition Infiniti is conducting this voluntary service campaign to recalibrate the speedometer and odometer at no charge for parts or labor.
IDENTIFICATION NUMBER
Infiniti has assigned identification number P0303 to this campaign. This number must appear on all communications and documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
Dealers are to correct each vehicle falling within the range of this campaign that enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer's inventory.
REQUIRED SPECIAL TOOL - Meter Reprogramming Kit (J-50419)
NOTE:
^ The above reprogramming kit and the reprogramming software (delivered via ASIST synchronization) can only be applied to vehicles affected by this campaign (campaign ID# P0303).
^ The software will not allow reprogramming of vehicles that are not affected by this campaign. Also the software will not allow reprogramming of vehicles that have already been reprogrammed.
^ The reprogramming can only be applied one time to each affected vehicle. Vehicle identification is validated against data located on NNA's servers before reprogramming is allowed.
REPAIR OVERVIEW
CLAIMS INFORMATION
Date: August 31, 2010
VOLUNTARY SERVICE CAMPAIGN
2007-2008 FX SPEEDOMETER AND ODOMETER PROGRAMMING ERROR
This bulletin has been amended. The correct Owner's Letter has been attached.
CAMPAIGN ID#: P0303
APPLIED VEHICLES: 2007-2008 FX (S50)
Check Service Comm to confirm campaign eligibility
INTRODUCTION
On certain model year 2007 and 2008 Infiniti FX vehicles the speedometer and odometer are reading out of specification. To remedy this condition Infiniti is conducting this voluntary service campaign to recalibrate the speedometer and odometer at no charge for parts or labor.
IDENTIFICATION NUMBER
Infiniti has assigned identification number P0303 to this campaign. This number must appear on all communications and documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
Dealers are to correct each vehicle falling within the range of this campaign that enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer's inventory.
REQUIRED SPECIAL TOOL - Meter Reprogramming Kit (J-50419)
NOTE:
^ The above reprogramming kit and the reprogramming software (delivered via ASIST synchronization) can only be applied to vehicles affected by this campaign (campaign ID# P0303).
^ The software will not allow reprogramming of vehicles that are not affected by this campaign. Also the software will not allow reprogramming of vehicles that have already been reprogrammed.
^ The reprogramming can only be applied one time to each affected vehicle. Vehicle identification is validated against data located on NNA's servers before reprogramming is allowed.
REPAIR OVERVIEW
CLAIMS INFORMATION
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.