Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2008FX45 AWD V8-4.5L (VK45DE)REPAIR AND DIAGNOSISSTARTING AND CHARGINGSTARTING SYSTEMKEYLESS STARTING SYSTEMTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSANTITHEFT - INTELLIGENT KEY/NATS KEY REGISTRATION
2008 Infiniti FX45 AWD V8-4.5L (VK45DE)
Antitheft - Intelligent Key/NATS Key Registration
2008 Infiniti FX45 AWD V8-4.5L (VK45DE)SECTION Antitheft - Intelligent Key/NATS Key Registration
Classification:
EL07-046
Reference:
ITB08-003
Date:
January 11, 2008
APPLIED VEHICLES:
2008 EX (J50)
2006-2008 G35 (V35 & V36)
2007-2008 G37 (CV36)
2006-2008 FX (S50)
2006-2008 M (Y50)
2006-2008 QX56 (JA60)
SERVICE INFORMATION
The Service Procedures for the following will no longer be in Technical Service Bulletins:
^ NATS Key registration.
^ Intelligent Key registration.
^ Steering Look Unit ID Registration
These Procedures are now only available in the CONSULT-III Operations Manual.
You must have the Security Key installed to access the Manual.
The Manual is blocked from print functions for security.
To open the Manual: Close ASIST. Click on START, then CONSULT-III Operation Manual. From the Manual Selection window select CONSULT-III Operation Manual NATS-NVIS. Then select the language choice.
Use the information in Table A to determine which Manual Selection is required for the vehicle you are working on.
Disclaimer
EL07-046
Reference:
ITB08-003
Date:
January 11, 2008
APPLIED VEHICLES:
2008 EX (J50)
2006-2008 G35 (V35 & V36)
2007-2008 G37 (CV36)
2006-2008 FX (S50)
2006-2008 M (Y50)
2006-2008 QX56 (JA60)
SERVICE INFORMATION
The Service Procedures for the following will no longer be in Technical Service Bulletins:
^ NATS Key registration.
^ Intelligent Key registration.
^ Steering Look Unit ID Registration
These Procedures are now only available in the CONSULT-III Operations Manual.
You must have the Security Key installed to access the Manual.
The Manual is blocked from print functions for security.
To open the Manual: Close ASIST. Click on START, then CONSULT-III Operation Manual. From the Manual Selection window select CONSULT-III Operation Manual NATS-NVIS. Then select the language choice.
Use the information in Table A to determine which Manual Selection is required for the vehicle you are working on.
Disclaimer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.